To force reboot the phone, pull out the battery, press The phone needs power that comes from the battery to work. Now, to make this procedure even more effective, press and hold the Power key for a minute while the battery is not connected to the device. The screen stays black and the phone won’t respond at all. This is one of the features that many people wish available on the new Galaxy devices. If it doesn’t work, then you can suspect that the problem is the phone itself.
You don’t have to worry too much before you try these possible solutions and only if nothing works, then you should consider taking it to a technician. I know nothing about phones and I was able to get mine to turn back on following your instructions!!!! Yesterday, it turned off and when I turn it back on, it won’t. Samsung Galaxy J3 2017 that Won’t Turn On – Troubleshooting guide for an issue that happen to a smartphone such as Samsung Galaxy J3 2017 requires more than just step by step solution. Make sure that the charging icon is displayed on the screen to ensure you that the problem is not hardware related. It needs to explain about the cause of the problem as well as how the … Many would think charging is as simple as the charger pushing electricity to the battery. Can you help?This is a necessary procedure just before you jump into some complex troubleshooting procedure. While the battery is disconnected, press It is always possible that the phone won’t turn on because it has no more power. But let me tell you, the firmware plays a great role in this process. If it’s a hardware problem then the device may not display the usual charging icon on the screen and/or the LED indicator won’t be lit.Allow the device to charge for a few minutes regardless whether the charging signs are showing or not. When in this mode, the Android interface won’t be loaded so if the problem is due to firmware issue, the phone should be able to boot up successfully.Press and hold the Volume Up key and the Home key, then press and hold the Power key.When the device logo screen displays, release only the Power keyWhen the Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options). Firmware is responsible for some many things including the flow of the current. The troubleshooting guide below is basic and safe to follow. (HTTP response code 503)If you think you have been blocked in error, contact the owner of this site for assistance.If you are a WordPress user with administrative privileges on this site, please enter your email address in the box below and click "Send". It’s one of those common issues that may occur anytime, anywhere. !Thanks for the info on rebooting w/ battery removal nad replacement for phone that wasn’t coming on or charging….it worked!None of these worked, my screen is black but it still turns on and i get my notificationsPower-related issues are very common not just to the #Samsung Galaxy J3 (#GalaxyJ3) but to all smartphones or devices that use battery to power up their hardware. Learn how to troubleshoot your phone that won’t turn on or power up after an update. Before this, I was using the S6 but I want to have a new device so I gave my other phone to my brother and bought this one instead. There are reports for Reboot the phone is a standard troubleshooting action that may help with all kind of smartphone problem including this one. When in this mode, the Android interface won’t be loaded so if the problem is due to firmware issue, the phone should be able to boot up successfully.Press and hold the Volume Up key and the Home key, then press and hold the Power key.When the device logo screen displays, release only the Power keyWhen the Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options).After the battery pull and charging procedures and the phone is still not turning on, then you need to try to boot it up in different modes.