Coaxial cable connectors are used to connect cables to other devices and maintain the cable’s shielding. For general enquiries: 03457 201201 (standard rate line)
RG-6 cables are also made with a different kind of shielding, which means they can carry GHz level signals more effectively.RG-59 coaxial cable is the best type for CCTV systems, but RG-6 can also be used.RG-6 can run longer distances than RG-59 without loss to a video signal, however, it’s a thicker, firmer cable which isn’t as convenient to work with.The most common types of coaxial cable for video are RG-59 and RG-6. The different layers of a coaxial cable are shown in the image below:The transmission speed of coaxial cable is 10Mbps (megabits per second), and they offer 80 times more transmission capacity than twisted pair cables.Another benefit of coaxial cable is the electromagnetic field carrying the signal exists only in the space between the inner and outer conductors. BNC connectors are specified by IEC standard IEC60169-8. Surrounding the copper wire is a dielectric plastic insulator3. The higher the RG number, the thinner the central conductor core is.Coaxial cables are a popular choice because their shielded design allows the centre conductor to transmit data quickly while being protected from damage and interference.Coaxial cables are mainly built up of these four different layers:1.
Of these, RG-59 is the industry standard cable, whereas RG-6 is better for digital video signals.To help identify the different types of coaxial cable, here’s a size guide:Coaxial cable connectors are used to connect cables to other devices and maintain the cable’s shielding.There are two distinct connector styles – known as male and female. The external layer is a plastic coating which protects the internal layers from damageCoaxial cable works by carrying data in the centre conductor, while the surrounding layers of shielding stop any signal loss (also called attenuation loss) and help reduce EMI.The first layer, called the dielectric, provides distance between the core conductor and the outer layers, as well as some insulation.The next layers, collectively referred to as the shield, keep electrical impulses and radio transmissions out.
This can be problematic if there’s more than one device which requires a signal.To help identify the different types of coaxial cable, here’s a size guide:There are two distinct connector styles – known as male and female.
Of these, RG-59 is the industry standard cable, whereas RG-6 is better for digital video signals.When coaxial cable lines are produced, they only provide one signal to power a singular device. The most common types of coaxial cable for video are RG-59 and RG-6.
The argument, over what the "BNC" in "BNC connector" means, will go on forever. This means coaxial cable can be installed next to metal objects without losing power, unlike other types of transmission lines.The main disadvantage of using coaxial cable is that single cable failure can take down an entire network.There are two main types of coaxial cables – ones with an impedance of 75 Ohm (Ω) and ones with an impedance of 50 Ohm.Cables with 75 Ohm are mostly used for video signals, while 50 Ohm cables tend to be used for data and wireless communications.In coaxial cables, Ohm refers to the impedance, which is the measure of resistance in the cable to the flow of electrical energy.RF coaxial cables are used to carry radio frequency signals. Usually jacks and plugs are symmetrically shaped, but sometimes they are keyed. They are the most suitable connector for use with RG59/U cable.
They’re particularly useful for base stations and broadcast communication systems.MCX connectors operate between DC and 6GHz in wireless, GPS, TV tuner cards, RF hardware, and digital cellular applications.
Coaxial Cable Guide Amphenol RF offers a broad range of connectors designed to terminate to many commercially available coaxial cable types.
There are two distinct connector styles – known as male and female. The technology has been around since the early 20th century, with these cables mainly being used to connect satellite antenna facilities to homes and businesses thanks to their durability and ease of installation.Coaxial cables are mainly built up of these four different layers:The first layer, called the dielectric, provides distance between the core conductor and the outer layers, as well as some insulation.The next layers, collectively referred to as the shield, keep electrical impulses and radio transmissions out. A centre conductor which is usually a copper wire, which data and video travels through2. They’re particularly useful for base stations and broadcast communication systems.MCX connectors operate between DC and 6GHz in wireless, GPS, TV tuner cards, RF hardware, and digital cellular applications. Male connectors have metals pin which protrude from the centre and female connectors have a recessed hole to receive the pin.Here are some of the most common coaxial connector types and their applications:These connectors are mainly used for applications which require water resistance, as they’re robust and durable. It has a larger conductor, which provides a much better signal quality, and the dielectric insulation is thicker.
Coaxial cable, sometimes known as coax cable, is an electrical cable which transmits radio frequency (RF) signals from one point to another. Orderlines: 1300 656 636 (8.00am-6.00pm AEST Monday-Friday)